MXJO IMR 18500F battery that can be used in most mods. Flat top battery rated at 1000mah and 15A
Specs:
Model | MXJO IMR 18500 1000MAH 15A | |||
Material | LiMn | |||
Capacity | 1000Mah | |||
Voltage | 3.7V | |||
Maximum charging voltage | 4.2V | |||
Discharge Cut-off Voltage | 2.5V | |||
Max charging rate | 15A | |||
Diameter | 18.0±0.3 mm | |||
Height | 50.0±0.3 mm | |||
Weight (Approx.) | 32.0g | |||
Resistance (Max, at 1000Hz.) | <20mΩ | |||
Operation Temperature Range | Charge(0~45°C ) Discharge(-10~60°C ) | |||
Cycle Life | > 500 cycles | |||
Description: |
Safe chemistry LiMN 3.7V 15A 1000mah rechargeable battery in 18500 size. These cells can handle high amperage and is safe to use in series / multi-cell applications. Can be charge with any LiIon battery charger with 4.2V output. |
|||
IMPORTANT: |
Fully charge before first use. |
Posted by Brandon on 16th Jun 2014
Bought these cause the price was right, and wanted a few 18500 size for stealth vaping in my telescopic mechanicals. Ehh, ok batteries, just don't expect too much from them. Would only recommend 1.0 ohm or higher builds with these batteries, no sub-ohming. They drain way too fast. I killed one in about an hour. Now only fully charges up to 3.4 volts.