Loading... Please wait...
Categories
NEW PRODUCTS
-
$12.95
-
$10.95
-
$59.95
-
$19.95
-
$34.95
Our Newsletter
Aspire ET-S Bottom Dual Coil (BDC) Glassomizer
Description
The Aspire ET-S BDC is a new style of bottom coil clearomizer featuring dual heating elements to provide twice the vapor. It is constructed entirely of metal and pyrex glass. The outer metal casing protects the glass, but includes a window so that you can see your e-liquid level at all times. Also, the tank has a capacity of just under 3ml of e-liquid and it comes pre-loaded with a 1.8ohm dual coil head.
Compare this tank with a standard Bottom Coil Clearomizer (BCC) and you will be astonished by the difference in taste and performance. The Bottom Dual Coil (BDC) design is a major upgrade when compared to similar single coil tanks not only because of the dual coils, but also because of the uniquely designed replaceable coil and airflow system. It was designed differently to eliminate common issues such as an airy draw, gurgling, and leaking that users often experience with other BCC tanks. It also works to eliminate outside influences on flavor to provide a true and pure taste experience.
Replacement Coil Heads for this product can be found here: Aspire Bottom Dual Coil (BDC) Replacement Coil Heads (5pk)
This product has is compatible with eGo threaded devices only. Will not fit devices that only have the inner 510 thread.
How to Use your Aspire BDC:
- To fill, turn the tank upside down and remove the threaded end cap. Fill the outer portion of the tank (avoid getting e-liquid into the center airflow tube) and then screw the end cap back onto the tank tightly. You can now turn it rightside up and check for leaks before using.
- Gurgling or Leaking can occur if liquid gets into the center airflow tube. To clear this liquid and improve performance remove the tank from the battery and blow through the mouthpiece into a paper towel. The excess liquid will come out of the threaded end of the device. If this happens often you may need to check that all connections are screwed down tightly or replace the head and wick assembly with a new one.
- The head and wick assembly will sometimes loosen itself when the threaed end cap is unscrewed. Always check that it is pushed into the bottom cap tightly tightly before screwing the cap back on. Not doing so could result in a leaking or non-working device.
- You should never run the tank completely dry. Doing so could result in a burnt or damaged wick and can cause leaking. Refill the tank when the liquid level reaches approximately 1/3 full
- The lifespan of replacement heads can vary quite a bit, but following the above instructions will maximize the lifespan of the coil.
Related Parts and Accessories
Product Reviews
Showing reviews 1-10 of 54 | Next
-
Aspire is the Way to go
Posted by Sharon on 11th Feb 2014
I keep going back to this one. The 3ml capacity they hold is great - once a day fill for me (I vape heavy on 3 different ones all day long) and I love that you do not need a thread cover. They hold their own with the bigger batteries but still look stylish with a smaller 650amh one also. And being a glass one - covered with metal for protection - AWESOME!!
-
Final Thoughts.....
Posted by Kevin on 11th Feb 2014
After some time with this beautiful tank, I have come to some conclusions. For me, its a very specific vape. Meaning if I'm alone in bed there's nothing better. But if I'm out and about it requires high maintenance. This is a quiet tank and if there is any backround noise you won't hear or feel it flooding, gurgling and the like. Next your burning the head. You need to be very conscience of your draw with this tank. So for practical purposes it's more of a part time tank for me. It's a shame too, cause it's beautiful and I want to show it off. I was a chain smoker, so now, I chain vape. I always go through replacement heads quickly, so your experience may vary,
I would like to add that the design of this Aspire ET-S is well thought out. They have made a bottom coil tank that is mess proof when refilling. I don't know if this was accomplished before, but the T3 Kangers were very messy ordeals. Kudos to the Aspire team from one who fills his tank quite often.
-
Aspire BDC glassomizer
Posted by albert suarez on 10th Feb 2014
this tanks are simply the best I have tried. they are easy to use have exelent flavor and they are very well made. I will buy this again
-
BDC Glass
Posted by cc on 10th Feb 2014
I think these are great. Coming from the ce-5 styles (which are also awesome) i'd swear there is just a bit more flavor with the pyrex/glass tank. No leaks, no issues and the only warning is that it is top heavy so there is a slight adjustment. Hardly something to complain about.
-
Update on Aspire ET-S
Posted by Kevin on 5th Feb 2014
Wrote a review earlier saying, it's not what I'm looking for. Well, things have changed. Namely the heads. Was complaining about a tight draw, I also experienced flooding and dry hits. But I wasn't really premature in my opinion as I tried 2 coil heads, and then a third that I promptly burnt. But lo and behold on the 4th head, I see what everyone is raving about. The draw is a bit loosened, clouds of vapor, no leaking, gurgling, outstanding. At first I thought maybe its the juice. But I'm using the same juice so I know its the heads. And these heads are used by a few aspire tanks. I'm hoping I just had a bad streak and will now enjoy this beautiful tank.
If you experience burning, gurgling, flooding, most likely it's not you, your liquid or the tank, it's the replaceable dual coil head. It works like a dream when the head is good. Though going through 4 heads to find one that works well is not good.
-
do not cover air holes with finger on aspire and its an excellent device
Posted by JIm on 5th Feb 2014
I wasnt sure about this product at first since i kept getting a burning juice flavor on occasion. I figured out that i was holding it wrong and accidentally covering up one of the air holes. If you look closely at bottom of aspire you will see the holes i am talking about. Just watch how you are holding your device making sure your finger isnt covering hole on the aspire and i am sure you will like this excellent product
-
very stylish
Posted by Kevin on 2nd Feb 2014
Beautiful tank, well made. That said it's quite top heavy on a small ego battery. And its hard to see the liquid inside through those windows. This is my first BDC (before only single coil) and I don't think this is what I'm looking for. I first began vaping looking for something that mimics smoking. And I'm still searching. The draw on these is alot tighter than say the T3's. Those are much more airy and I believe mimic the draw of a real smoke better. Also as mentioned before, the flavor on these are more pronounced, which is a good thing if your into flavors. But I'm into non- sweet tobaccos and with these dual coils, they become a little sweeter. Going to try the Aspire T3 BDC here at MFS and maybe find the best of both worlds (airy, muted flavor and tons of vapor). Will see. This Aspire ET-S is a very well made, stylish glassomizer that I'm sure some will love.
-
Awesome Glassomizer
Posted by greg on 1st Feb 2014
Gives good taste and tons of vapor. Expensive but def is a sturdy,great tank
-
Best on the market
Posted by Metodija Josifovski on 30th Jan 2014
I am so impressed with the quality of these tanks that I ordered a bunch more for me and for all my friends that had the other types. For the money spent, very high quality, very durable and so easy to clean and maintain. I recommend this to anyone that wants to have a pro set with them. Also, don't be afraid to choose colors, they all look great and feel smooth on touch. I won't be moving to another product for sure.
-
great vape
Posted by daniel smith on 30th Jan 2014
Nice draw and great taste.
Showing reviews 1-10 of 54 | Next
