Pioneer4u iPVd2 Temp Control

The unassuming IPVD2 might just be the best temperature control mod you've ever used.  The all-metal, single-18650 D2 is only three inches tall, but it cranks out a world of temp-controlled awesomeness every time you press the fire button. 

Temperature control on the D2 works through the reliable Yihi SX130H chip.  The D2 has a 10-50 Joule mode for TC, with a range of 212°-572° F or 100° - 300° C, and up to 25 amps of output current.  In regulated mode, the D2 has up to 75 watts to fire your Kanthal or SS build, and its super compact form factor leaves more room for you to stow multiple tanks and RDAs.

Construction on the D2 is rock-solid; no cheap plastic feel here.  Everything is polished, fitted metal, even the buttons.  The recessed OLED display is ultra-bright and easy to read.  The all-metal battery cover is held in place by ball bearing tension, and a quick squeeze will lock it on tight and do away with rattle.  If you wish, you can charge your loaded 18650 through a base mounted 5v plug, but because of its extreme portability, you'll have plenty of room for extra 18650 batteries. 

You're not going to find anything close to the temp control D2 in terms of ergonomics and convenience; it's the first truly pocket sized TC mod that puts out real power with real control.

Specs and Features:

• Output power: 7w – 75w
• Output Voltage: 3.6v – 7v
• Output Joule: 10J – 50J
• Output Voltage in Joule (TC) mode: 1v-7v
• Output Current 1-25A
• Standard Resistance: 0.2Ω - 3Ω
• Joule Mode resistance: 0.05Ω – 0.3Ω
• Single 18650 design
• 510-Threaded, adjustable spring-loaded firing pin.