This is a rapid eGo battery charger and can be used as a USB charger for any eGo Batteries. 

Instructions: 

1. Plug directly into a USB outlet or use with a compatible A/C Charger Adapter to plug into a wall outlet.  
2. Screw the battery onto the charger. 
3. The battery LED may flash several times or simply remain on to indicate a good connection with the charger. 
4. The charger light will turn from green to red if a charge is needed. 

Charger LED status:

• Green Light:  No battery connected or battery is fully charged
• Red Light:  Battery is charging  (it is normal for the LED to flash green for a split second at regular intervals.  This is the charger checking to see if the battery is fully charged)

Important: Ensure that the battery and charger contacts are clean before using.  Dirty contacts may result in a failure to charge or a short that could damage your equipment.

Charging time varies depending on the capacity of the battery

This charger can ONLY be used with eGo Batteries or EVOD Batteries (includes all eGo style and EVOD style batteries)

This charger is NOT to be used for "cigalike" batteries (EX: Joyetech 510 Batteries or Kanger eSmart batteries)

Using any other type of battery or an incorrect A/C adapter with this charger will cause damage to your equipment and is a fire Hazard.

eGo / EVOD USB Charger output is DC 4.2V 420mah